L-806 L-807 LED Lighted Wind Cone with Obstruction Light/Illuminated Wind Sock

-

A windcone is a carefully designed fabric cone that is mounted on a metal frame. This metal frame is attached to a vertical pole via a swivel that allows the fabric cone to rotate freely. The fabric cone must be designed to provide relative wind speed indication. A fully extended windsock indicates a wind speed in excess of 15 knots. An illuminated windcone must be powered in some manner. Common methods are with 120VAC/240VAC or 6.6Amp circuitry. Recent advances in both LED and solar power technology have allowed for the creation of reliable and compliant solar powered LED windsocks.
Wind Direction Indicators or wind cones provide visual surface wind direction and velocity information to pilots in flight or on the ground at airport and heliports. We based our wind cone portfolio on FAA specifications


OPTIONS

 1. Fabric Windsock:
  • Size 1- 1.2m length, 300mm in throat diameter and 150mm in trailing end diameter;
  • Size 2- 2.4m length, 600mm in throat diameter and 300mm in trailing end diameter;
  • Size 3- 3.6m length, 900mm in throat diameter and 450mm in trailing end diameter;
  • Color: Orange, White/Red
2. 110-240VAC, 6.6A, Solar Powered
3. Pole/Mast: Base Hinged, Center Hinged
4. Pole Height: 2m/3m/4m/5m/6m/7m...

SPEC

Item Name
Windsock for Helipad
Model
CM-HT12/F
Operating Voltage
AC 110V-240V, 2.8-6.6 A, 12 VDC (Solar)
Power consumption
≤20W
Fabric Windsock

Size
1.2m length, 300mm in throat diameter and 150mm in trailing end diameter
2.4m length, 600mm in throat diameter and 300mm in trailing end diameter
3.6m length, 900mm in throat diameter and 450mm in trailing end diameter
Color
Orange, White/Red
Material
Polyurethane coated nylon
Reinforcement
Double stitched; extra material on large diamete
Fasteners
UV rated cable ties
Obstruction Light
Lamp
 Single lamp LED (multiple source)
Standard
ICAO, FAA (L-810) and Transport Canada
Power Supply
100-240 VAC, 12 VDC
Wattage
5W
Color
Red
Light Intensity
32.5cd
Basket
Size
0.3m, 0.6m, and 0.9m diameter
Material
Aluminum alloy parts, stainless steel hardware
INSTALLATION






TEST VIDEO

CONTACT

Ms Sophia Guo | Overseas Business Development Hunan Chendong Technology Co.，Ltd T:+86-0731-85563165 85563265 | F: +86-0731-85563365 P: +86-13929493960(Whatsapp) | Skype:sophia.guo88 A:#4 Building, No.588 XinCheng Science&Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha,China. W:http://www.cdt-en.com/ | E: sophia@chendongtech.com

评论

发表评论

此博客中的热门博文

Night Marking Red Obstruction Light System for Transmission Tower

-
图片
An overhead power line is a structure used in electric power transmission and distribution to transmit electrical energy along large distances. It consists of one or more conductors (commonly multiples of three) suspended by towers or poles. Red obstruction lights are used to increase conspicuity during nighttime. The red obstruction light system is composed of flashing omnidirectional lights (L-864) and/or steady-burning or flashing (L-810) lights. When one or more levels are comprised of flashing lights, the lights should flash simultaneously 1. Single Obstruction Light. A single red obstruction light (L-810) may be used when more than one obstruction light is required either vertically or horizontally, or when maintenance is needed, and can be installed within a reasonable time. Top Level. A single steady-burning light (L-810) may be used to identify low structures, such as airport instrument landing system buildings, as well as long horizontal structures, such as perimeter fenc...
阅读全文

High-voltage lines are major hazards for low-flying aircraft. Placing beacons on pylons is not sufficient to ensure safety due to the very long spans of cable. - Day Marking The warning ball for high voltage lines is a visual anti-aircraft protection for overhead wires and OPGW wires in high voltage transmission lines. It is recommended that in the case of a sphere with a diameter of 60 cm, the high-voltage line should be marked every 30 meters at the most. - Night Marking Conductor marking lights serve as a specialized category of aircraft warning lights specifically crafted for overhead power lines. In contrast to overhead wire markers that rely on daylight, conductor marking lights are designed to be visible during nighttime. These lights enhance the visibility of transmission line catenary wires in the vicinity of airports, heliports, and locations spanning across rivers. It is built around induction and takes its power from the current of the line, by the intermediary of a multi-winding coil directly installed within the beacon. This allows our system to adapt to every line voltage.

-
图片
High-voltage lines are major hazards for low-flying aircraft. Placing beacons on pylons is not sufficient to ensure safety due to the very long spans of cable. - Day Marking The warning ball for high voltage lines is a visual anti-aircraft protection for overhead wires and OPGW wires in high voltage transmission lines. It is recommended that in the case of a sphere with a diameter of 60 cm, the high-voltage line should be marked every 30 meters at the most. - Night Marking Conductor marking lights serve as a specialized category of aircraft warning lights specifically crafted for overhead power lines. In contrast to overhead wire markers that rely on daylight, conductor marking lights are designed to be visible during nighttime. These lights enhance the visibility of transmission line catenary wires in the vicinity of airports, heliports, and locations spanning across rivers. It is built around induction and takes its power from the current of the line, by the intermediary of ...
阅读全文

Overhead Wire Marker Fiberglass Aircraft Warning Sphere Day Marking Aerial Marker Balls for High Voltage Power Lines

-
图片
Overhead Wire Marker Fiberglass Aircraft Warning Sphere Day Marking  Aerial Marker Balls for High Voltage Power Lines  Warning sphere is used for warning aircraft pilots in daytime and nighttime, which is compliant with International Civil Aviation Organization (ICAO) recommendations annex 14 chapter 6. It can be used in overhead cable, guyed wire, especially in extra high voltage power transmission line, cross river power transmission line, cross road, bridge power transmission line and so on. It is made of high-grade polyethylene with the color of red, orange, white. Different colors' warning sphere should be displayed alternately. If there are many lines, warning sphere should be displayed on the highest line. It can resistant to corrosion, rust, water, dust, high temperature, can be used for long time. For more details: HUNAN CHENDONG TECH CO., LTD Tel:  +0086-0731-85563265                          ...
阅读全文