Blue Flush Mounted Inset Taxiway Heliport Light

 

Taxi Way Lighting

  • Taxiway edge lights shall be provided at the edges of a runway turn pad, holding bay, de-icing/anti-icing facility, apron, etc.
  • Intended for use at night and on a taxiway not provided with taxiway centre line lights, except that taxiway lights need not be provided where, considering the nature of the operations, adequate guidance can be achieved by surface illumination or other means.
  • Taxiway edge lights shall be provided on a runway forming part of a standard taxi-route and intended for taxiing at night where the runway

Flush Mounted

  • Flush mounted lights can be used in place of an elevated light (pole or ground mounted) at locations where the lights are frequently knocked down by aircraft and or maintenance vehicles.
  • Flush mounted lights are strong enough to drive over without damaging the light.

Application

Light to outline the edges of heliport taxiways during periods of darkness or restricted visibility conditions. Blue Steady; Inset.

Spec

  • Model No.:CM-HT12-CQB
  • Light Type:Heliport Taxiway Edge Light
  • Input Power:AC90-260V/6.6A
  • Power Consumption:≤15W                                                  
  •  Light Intensity:30cd                                             
  • Light Source:LED                         
  • Emitting Color:Blue     
  • Type of Beacon: Steady                               
  • Light Lifespan:100,000 Hours
  • Ingress Protection:IP68
  • Environment Humidity:0-100%
  • Altitude:≤2500m
  • Operating temperature:-40℃~55℃
  • Wind Load:80m/s
  • Net Weight:7.3kg
  • Size:Φ220mm×160mm

Video


Contact Info

Ms Sophia Guo | Overseas Business Development
Hunan Chendong Technology Co.,Ltd
T:+86-0731-85563165 85563265  | F: +86-0731-85563365 
P: +86-13929493960(Whatsapp)  | Skype:sophia.guo88
A:#4 Building, No.588 XinCheng Science&Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha,China.
W:http://www.cdt-en.com/ | E: sophia@chendongtech.com

评论

此博客中的热门博文

Night Marking Red Obstruction Light System for Transmission Tower

High-voltage lines are major hazards for low-flying aircraft. Placing beacons on pylons is not sufficient to ensure safety due to the very long spans of cable. - Day Marking The warning ball for high voltage lines is a visual anti-aircraft protection for overhead wires and OPGW wires in high voltage transmission lines. It is recommended that in the case of a sphere with a diameter of 60 cm, the high-voltage line should be marked every 30 meters at the most. - Night Marking Conductor marking lights serve as a specialized category of aircraft warning lights specifically crafted for overhead power lines. In contrast to overhead wire markers that rely on daylight, conductor marking lights are designed to be visible during nighttime. These lights enhance the visibility of transmission line catenary wires in the vicinity of airports, heliports, and locations spanning across rivers. It is built around induction and takes its power from the current of the line, by the intermediary of a multi-winding coil directly installed within the beacon. This allows our system to adapt to every line voltage.

Overhead Wire Marker Fiberglass Aircraft Warning Sphere Day Marking Aerial Marker Balls for High Voltage Power Lines