CDT-Aviation Obstruction Light

Obstruction Light System Controller Application CM-CKN Mainly applied to aviation obstruction light’s fault alarm monitoring, ON/OFF switch and control function including flash rate adjustable for tower(transmission, telecom,microwave etc.), chimney(power plant, coking plant, chemistry plant etc.), tall buildings, large bridges, large port machinery, large engineering machinery and wind turbine etc., it also could be used to control the street lamp.This control cabinet only for CDT aviation obstruction light’s,not guarantee similar control functions for other non-match avation obstruction lights. Obstruction Light System Controller Features: AWL’s flash synchronously Fault alarm indicators on the panel and alarm signal output. Alarm signal with dry contact passive output. Auto-Manual switchable, if don’t need photocell automatically switch function, it could be switched to manual control. Main& standby fault switch function :when the main light fails, will switches to the standby l...

COMPLIANCE AND APPLICATIONS FAA AC 150/5345-43G Our LED obstruction lighting outdoor controllers have been designed to reliably sense the proper operation of the latest low-power LED obstruction lights, with an array of dry alarm contacts to report on all aspects of system health. Control boards have several functions photoelectric switch management fault management (automatic main/stand-by bulb switchover) alarm management (remote transmission of alarms, generation of visual alarms) According to the installation environment, control board electrical circuits are enclosed in spcefic housing box: use: outdoor material: aluminum alloy protection: IP65 The following special functions may be present if required: synchronisation of all the flashing obstruction lights in the system on-board or external UPS Parameter Item Name                                   Aviation Obstruction Light Contro...

CDT designs, manufactures, and sells ICAO and FAA compliant LED aviation obstruction lights. We are a team of technicians, engineers and project managers who love their jobs. Since 2012, we have been helping customers meet the day-to-day challenges of obstruction lighting operations worldwide. Today, our solutions serve markets that include telecommunications & broadcast, building & construction, as well as heliports and specialty applications for oil & gas. We develop and manufacture complete obstruction lighting solutions for marking high-rise buildings, industrial chimneys, telecom towers and vertical structures in general. Our engineering solutions are designed to comply safety regulations and standards and to work in extreme weather conditions, freezing or sweltering temperatures, in marine, desert and sandy environments. For more details: Ms Sophia Guo | Overseas Business Development Hunan Chendong Technology Co.，Ltd T:+86-0731-85563165 85563265  | F: +86-073...

 Our L-854 FM radio receiver/decoder is designed to provide pilots direct, unassisted air-to-ground control of airfield lighting systems. This field tunable radio allows pilots to activate airfield lighting with a series of 3,5, or 7 microphone clicks in a 5 second period. An integrated selectable timer shuts airfield lights off after 1, 15, 30, or 60 minutes of illumination. Our L-854 receiver is particularly useful for small to mid-sized airfields where continuous nighttime illumination is unnecessary and expensive. The unit is a virtual necessity for remote sites where the volume of qualified on-site control personnel may be limited. Our rugged, solid state design will provide years of service and is the perfect replacement for aging “crystal” based units. PARAMETER Product Name Pilot Controlled Helipad Light  Power supply AC90V-264V, 50HZ – 60HZ Working temperature Outdoor -40° - 55°, indoor -20° - 55° Receiving frequency 118000HZ – 135975HZ, channel spacing 25000Hz channe...

Aviation obstruction marking sphere is designed to provide daytime visual warning or nighttime visual warning if comes with reflective tape, for electricity transmission line and overhead wire for aircraft pilots, especially cross river high voltage transmission lines. CDT power line marker ball is made of high-grade Fiberglass Reinforced Plastics(FRP), diameter of 600mm and 800mm are available to meet different customers’ needs.  A marking sphere should be of one color such as aviation orange, white and red. Generally, the marking spheres are placed on the highest line. Where there is more than one line at the highest level, white and red, or white and orange spheres should be displayed alternately. This alternating color scheme provides the most conspicuity against all back ground. PARAMETER Name Aerial Marking Sphere   Model CM-ZAQ Operation Visible Distance 1200 meters Flashing frequency 35KV-1000KV Conductor diameter...

Aerodrome Beacon Light 4 LED Lamps 12 rpm, 24 flashes per minute White/Green Airport Rotating Beacons  CM-HT12-XZ-4 Rotating Beacons are designed primarily for night operation as identification and location markers for airports. Airport beacons help a pilot identify an airport at night. The beacon typically rotates at a constant speed, which produces the visual effect of coloured flashes at regular intervals. The combination of light colours from an airport beacon indicates the type of airport.  Key Feature Application Environment Above 2,500 meters above sea level; Outdoor: -40°C--+55°C; Relative air humidity: 95%; (+24.5 ° C), the maximum humidity can be greater than 100%; Between rain, snow, and ice; Corrosive salt spray. Technical Index 4 LED lights Lamp life: ≥50000 hours White, green, two-color lamp Lamp angle adjustable , 12 rpm, 24 flashes per minute ,Steel cabinet with powder layer , Voltage AC220V (DC optional) PARAMETER Item Name Airport Rotating Beacon Model CM-HT1...

L-801H/L-802H beacons are designed primarily for night operation as identifi cation and location markers for heliports. Compliance with Standards FAA: L-801H & L-802H AC 150/5345-12 (Current Edition) ICAO: Annex 14, para. 5.3.3 Parameter Item Name Helipad Beacon Model CM-HT12-XZ-3 FAA Type L-801H, L-802H Operating Voltage AC220V Power consumption ≤3*150W Flashing frequency 12 RPM rotation,  36 flashes/minute Life span ＞10000 hours Light Source Halogen lamp Emitting color White/Green/Yello Overall size 470×340×1045mm Net weight 80KG Ingress protection IP65 Altitude ≤2500m Operating temperature -40℃～55℃ Wind load 80m/sec. Test Video Contact Info Ms Sophia Guo | Overseas Business Development Hunan Chendong Technology Co.，Ltd T:+86-0731-85563165 85563265  | F: +86-0731-85563365  P: +86-13929493960(Whatsapp)  | Skype:sophia.guo88 A:#4 Building, No.588 XinCheng Science&Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha,China. W:http://www.cdt-en...