L-801H and L-802H Heliport Rotating Beacon(White, Green, Yellow)

L-801H/L-802H beacons are designed primarily for night operation as identifi cation and location markers for heliports.


Compliance with Standards

FAA: L-801H & L-802H AC 150/5345-12 (Current Edition)

ICAO: Annex 14, para. 5.3.3

Parameter

Item Name
Helipad Beacon
Model
CM-HT12-XZ-3
FAA Type
L-801H, L-802H
Operating Voltage
AC220V
Power consumption
≤3*150W
Flashing frequency
12 RPM rotation, 
36 flashes/minute
Life span
>10000 hours
Light Source
Halogen lamp
Emitting color
White/Green/Yello
Overall size
470×340×1045mm
Net weight
80KG
Ingress protection
IP65
Altitude
≤2500m
Operating temperature
-40℃~55℃
Wind load
80m/sec.






Test Video

Contact Info
Ms Sophia Guo | Overseas Business Development
Hunan Chendong Technology Co.,Ltd
T:+86-0731-85563165 85563265  | F: +86-0731-85563365 
P: +86-13929493960(Whatsapp)  | Skype:sophia.guo88
A:#4 Building, No.588 XinCheng Science&Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha,China.
W:http://www.cdt-en.com/ | E: sophia@chendongtech.com

评论

此博客中的热门博文

Night Marking Red Obstruction Light System for Transmission Tower

High-voltage lines are major hazards for low-flying aircraft. Placing beacons on pylons is not sufficient to ensure safety due to the very long spans of cable. - Day Marking The warning ball for high voltage lines is a visual anti-aircraft protection for overhead wires and OPGW wires in high voltage transmission lines. It is recommended that in the case of a sphere with a diameter of 60 cm, the high-voltage line should be marked every 30 meters at the most. - Night Marking Conductor marking lights serve as a specialized category of aircraft warning lights specifically crafted for overhead power lines. In contrast to overhead wire markers that rely on daylight, conductor marking lights are designed to be visible during nighttime. These lights enhance the visibility of transmission line catenary wires in the vicinity of airports, heliports, and locations spanning across rivers. It is built around induction and takes its power from the current of the line, by the intermediary of a multi-winding coil directly installed within the beacon. This allows our system to adapt to every line voltage.

Overhead Wire Marker Fiberglass Aircraft Warning Sphere Day Marking Aerial Marker Balls for High Voltage Power Lines