Tower aerial obstruction light, white omnidirectional medium intensity type a, bottom, middle and top of the tower, GPS flashing synchronization, power supply of batteries which will be charged by PV panels.

-

 


Tower aerial obstruction light, white omnidirectional medium intensity type a, bottom, middle and top of the tower, GPS flashing synchronization, power supply of batteries which will be charged by PV panels.


For more details:
Website:http://www.cdt-en.com/
Email:sophia@chendongtech.com
Phone/WhatsApp:+86-13929493960
#tower #transmissionlines #obstructionlight #aircraftwarninglight #solarenergy

评论

发表评论

此博客中的热门博文

Night Marking Red Obstruction Light System for Transmission Tower

-
图片
An overhead power line is a structure used in electric power transmission and distribution to transmit electrical energy along large distances. It consists of one or more conductors (commonly multiples of three) suspended by towers or poles. Red obstruction lights are used to increase conspicuity during nighttime. The red obstruction light system is composed of flashing omnidirectional lights (L-864) and/or steady-burning or flashing (L-810) lights. When one or more levels are comprised of flashing lights, the lights should flash simultaneously 1. Single Obstruction Light. A single red obstruction light (L-810) may be used when more than one obstruction light is required either vertically or horizontally, or when maintenance is needed, and can be installed within a reasonable time. Top Level. A single steady-burning light (L-810) may be used to identify low structures, such as airport instrument landing system buildings, as well as long horizontal structures, such as perimeter fenc...
阅读全文

FAA L-801A & L-802A Airport Rotation Beacon Light LED Alternate White and Green Medium Intensity/High Intensity Airport Beacon

-
图片
Aerodrome Beacon Light 4 LED Lamps 12 rpm, 24 flashes per minute White/Green Airport Rotating Beacons  CM-HT12-XZ-4 Rotating Beacons are designed primarily for night operation as identification and location markers for airports. Airport beacons help a pilot identify an airport at night. The beacon typically rotates at a constant speed, which produces the visual effect of coloured flashes at regular intervals. The combination of light colours from an airport beacon indicates the type of airport.  Key Feature Application Environment Above 2,500 meters above sea level; Outdoor: -40°C--+55°C; Relative air humidity: 95%; (+24.5 ° C), the maximum humidity can be greater than 100%; Between rain, snow, and ice; Corrosive salt spray. Technical Index 4 LED lights Lamp life: ≥50000 hours White, green, two-color lamp Lamp angle adjustable , 12 rpm, 24 flashes per minute ,Steel cabinet with powder layer , Voltage AC220V (DC optional) PARAMETER Item Name Airport Rotating Beacon Model CM-HT1...
阅读全文

LED Aircraft Warning Lights for Buildings, Medium Intensity Flashing Red, 2000cd Light Intensity, Night Marking, 110-240VAC & 12-48VDC, GPS Sync, ICAO Certified

-
图片
LED Aircraft Warning Lights for Buildings, Medium Intensity Flashing Red, 2000cd Light Intensity, Night Marking, 110-240VAC & 12-48VDC, GPS Sync, ICAO Certified CM-13 Medium Intensity Obstruction Lights (MIOL), red light, multi-LED type. According to ICAO - Annex 14 - Medium Intensity Obstacle Lights Type B or Type C and FAA L-864. Medium Intensity Obstacle Lights Type B should be used either alone or in combination with Low-Intensity Obstacle Lights Type B for night mode, whereas Medium Intensity Obstacle Lights Type C should be used either alone or in combination with Medium Intensity Obstacle Lights Type AC for daily and night mode where the obstacle is particularly large and the height of the surrounding soil is more than 45m. For more details:  HUNAN CHENDONG TECH CO., LTD Tel:  +0086-0731-85563265                                    Fax: +0086-0731-85563365      ...
阅读全文