Solar Obstruction Lights For Transmission Towers, Medium Intensity Type B Red flash beacon LED Solar Obstruction Light, utility tower lighting-Marking transmission towers, silos, chimneys, flarestacks and water towers

-

Solar Obstruction Lights For Transmission Towers, Medium Intensity Type B Red flash beacon LED Solar Obstruction Light, utility tower lighting-Marking transmission towers, silos, chimneys, flare stacks and water towers

Backgrouds

The customer required an ICAO compliant night time warning light system for transmission towers. The system needed to be low-cost, quick and easy to install and completely self-contained with an integrated power supply and fully automated to enable the lights to activate at dusk and deactivate at dawn.

A low-maintenance lighting system was also needed that wouldn’t require constant repairs or component replacement and that would run reliably for many years with minimal operator intervention. If maintenance was required, however, the light fixtures or their components needed to be easily replaced without interrupting or effecting the tower’s operation or the performance of the lights on other towers close by.

Solar powered ICAO MIOLO fixture

  • is lightweight, self-contained and quick and easy to install
  • has a dusk-til-dawn mode for complete automatic operation
  • is cost effective both in terms of initial outlay and total cost of ownership
  • is energy efficient, reliable and low maintenance
  • has zero operating costs
  • can be easily retrofitted to new and existing structures
  • does not interfere with tower performance
  • withstands the harshest of environments

Benefits
  • ICAO compliant MIOL Type B
  • Lightweight, completely self-contained fixture easily installed by a small crew
  • Automatic dusk-till-dawn operation
  • Fit-for-purpose, straight from the box
  • Robust and long-lasting
  • Over 100,000 hours of LED life 
  • User-replaceable battery
  • GPS Sync & Infrared Optional
Contact Information
  • HUNAN CHENDONG TECH CO., LTD
  • Tel:  +0086-0731-85563265                                   
  • Fax: +0086-0731-85563365          
  • Skype:  sophia.guo88
  • Phone/WhatsApp:  +0086-13929493960  
  • Email:  sophia@chendongtech.com                        
  • Website:  http://www.cdt-en.com/   









评论

发表评论

此博客中的热门博文

Aircraft warning sphere warning marker balls for power lines

-
图片
Aviation obstruction marking sphere is designed to provide daytime visual warning or nighttime visual warning if comes with reflective tape, for electricity transmission line and overhead wire for aircraft pilots, especially cross river high voltage transmission lines. CDT power line marker ball is made of high-grade Fiberglass Reinforced Plastics(FRP), diameter of 600mm and 800mm are available to meet different customers’ needs.  A marking sphere should be of one color such as aviation orange, white and red. Generally, the marking spheres are placed on the highest line. Where there is more than one line at the highest level, white and red, or white and orange spheres should be displayed alternately. This alternating color scheme provides the most conspicuity against all back ground. PARAMETER Name Aerial Marking Sphere   Model CM-ZAQ Operation Visible Distance 1200 meters Flashing frequency 35KV-1000KV Conductor diameter 15-60
阅读全文

Building Light-Building Obstruction Light/Rooftop Heliport Lighting

-
图片
Buildings lighting Obstruction lighting solutions to be set at the top of buildings, and heliport lights, to be set around the runway in order to guide helicopters pilots. Lighting of buildings with heliports If the building has an elevated heliport, that is to say located on a raised structure on land, lighting marks have to be set around the runways to guide the pilots during take-off and landing. In the case of these elevated heliports, the Final Approach and Take-Off areas (FATO), and the Touchdown and Lift-Off areas (TLOF) are coincidental: only the TLOF runway matters. As a matter of facts, TLOF area should be lighted with TLOF perimeter lights: fixed omnidirectional green lights, inside the floor, or not higher than 25cm, uniformly spaced from 3 meters maximum. It will be possible to add floodlights to the perimeter lights, in order to identify better the heliport marks.  Lighting of buildings judged as air obstacles In t
阅读全文

L-806 L-807 LED Lighted Wind Cone with Obstruction Light/Illuminated Wind Sock

-
图片
A windcone is a carefully designed fabric cone that is mounted on a metal frame. This metal frame is attached to a vertical pole via a swivel that allows the fabric cone to rotate freely. The fabric cone must be designed to provide relative wind speed indication. A fully extended windsock indicates a wind speed in excess of 15 knots. An illuminated windcone must be powered in some manner. Common methods are with 120VAC/240VAC or 6.6Amp circuitry. Recent advances in both LED and solar power technology have allowed for the creation of reliable and compliant solar powered LED windsocks. Wind Direction Indicators or wind cones provide visual surface wind direction and velocity information to pilots in flight or on the ground at airport and heliports. We based our wind cone portfolio on FAA specifications OPTIONS  1. Fabric Windsock: Size 1- 1.2m length, 300mm in throat diameter and 150mm in trailing end diameter; Size 2- 2.4m length, 600mm in throat diameter and 300mm in trailing end diame
阅读全文