Aircraft Warning System (L-864 Red Obstruction Light, L-865 White Obstruction Light, Warning Sphere) for Transmission Line Project

 


Aircraft Warning System (L-864 Red Obstruction Light, L-865 White Obstruction Light, Warning Sphere) for Transmission Line Project

L-864 Medium Intensity Red Flashing Obstruction Light

CK-15 Medium Intensity Obstruction Lights (MIOL), red light, multi-LED type. According to ICAO - Annex 14 - Medium Intensity Obstacle Lights Type B or Type C and FAA L-864.
Medium Intensity Obstacle Lights Type B should be used either alone or in combination with Low-Intensity Obstacle Lights Type B for night mode, whereas Medium Intensity Obstacle Lights Type C should be used either alone or in combination with Medium Intensity Obstacle Lights Type AC for daily and night mode where the obstacle is particularly large and the height of the surrounding soil is more than 45m.

Aircraft Warning Obstruction Light Features:
 * Based on LED technology
 * RED light - Flashing (Medium Intensity Obstruction Light Type B)
 * RED light - Steady Burning (Medium Intensity Obstruction Light Type C)
 * Intensity: >2000cd
 * Long life time >10 years life expectancy
 * Low consumption
 * Lightweight and compact
 * Degree of Protection: IP65
 * No RF-radiations
 * Easy to install
 * Wind resistance tested at 240km/h (150mph)
 * Vibration resistance up to: 80m/s2

Aircraft Warning Obstruction Light Options:
 * Twin version: two galvanically separated circuits in the same fixture(1 duty & 1 stand-by)
 * Stainless Steel beacon support bracket
 * Infrared version: IR wavelength 850nM


L-865 Medium Intensity White Flashing Obstruction Light

Medium Intensity Obstruction Light (MIOL), multi-LED type, compliant to ICAO Annex 14 Type-A, FAA L-865, and ICAO certified.

This product is the ideal solution when looking for compact and lightweight obstacle light, realized with high-quality products and with patented features.

CM-15 Medium Intensity Obstruction Light has been designed to be a compact and lightweight product; it can be easily installed on a horizontal surface thanks to its base or vertical surface thanks to its mounting bracket and a balance of patented lenses, electronics, and mechanical components make this device the most reliable and high-quality LED Aircraft Warning Light available on the market. 

KEY FEATURES
  • Based on LED technology
  • WHITE light - Flashing
  • Intensity: 20.000 cd day-mode; 2.000 cd night-mode
  • Long lifetime >10 years life expectancy
  • Low consumption
  • Lightweight and compact
  • Degree of Protection: IP65
  • No RF-radiations
  • Easy to install
  • Wind resistance tested at 240km/h (150mph)
  • ICAO Certified





评论

此博客中的热门博文

Night Marking Red Obstruction Light System for Transmission Tower

High-voltage lines are major hazards for low-flying aircraft. Placing beacons on pylons is not sufficient to ensure safety due to the very long spans of cable. - Day Marking The warning ball for high voltage lines is a visual anti-aircraft protection for overhead wires and OPGW wires in high voltage transmission lines. It is recommended that in the case of a sphere with a diameter of 60 cm, the high-voltage line should be marked every 30 meters at the most. - Night Marking Conductor marking lights serve as a specialized category of aircraft warning lights specifically crafted for overhead power lines. In contrast to overhead wire markers that rely on daylight, conductor marking lights are designed to be visible during nighttime. These lights enhance the visibility of transmission line catenary wires in the vicinity of airports, heliports, and locations spanning across rivers. It is built around induction and takes its power from the current of the line, by the intermediary of a multi-winding coil directly installed within the beacon. This allows our system to adapt to every line voltage.

Overhead Wire Marker Fiberglass Aircraft Warning Sphere Day Marking Aerial Marker Balls for High Voltage Power Lines