Dual LED L-864 Red Medium Intensity Obstruction Beacon, 1 duty + 1 stand-by, Flashing Red, 2000cd

-

The dual/double obstruction beacon utilizes state-of-the-art optical design to achieve smaller and portable shapes, efficient and lower consumption. Its robust will provide years of maintenance free service. It is used increase conspicuity of structures or obstructions during nightime. Widely used in any obstruction like high-rise buildings, chimney, telecom towers, transimission power towers, airports,wind turbines and crane machines.

For more details:
  • HUNAN CHENDONG TECH CO., LTD
  • Tel:  +0086-0731-85563265                                   
  • Fax: +0086-0731-85563365
  • Phone/WhatsApp:  +0086-13929493960               
  • Skype:  sophia.guo88
  • Email:  sophia@chendongtech.com                        
  • Website:  http://www.cdt-en.com/    





















Compliance&Approval:
· ICAO Annex 14, Volume I, 6th Edition, July, 2013
· ICAO Aerodromes Design Manual, Chapter 18
· FAA AC150/5345-43G
· FAA Engineering Brief 67 Specifications
· Lamp unit certified to ICAO compliant by Intertek

Applications:
· ICAO medium intensity type B
· FAA L-864 type

Advantages:
  • Composed of 2 units of L-864 type lamps.
  • Lamp unit is an ICAO approval type.
  • Rubust stainless steel lights support bracket.
  • Fixture can be used with 100V~250V AC, 50Hz or 60Hz.
  • LED low power consumption 30 Watts average.
  • Internal single chip computer control smart and reliable.
  • Surge protection device integrated in the light.
Technical Features:
  • Operation voltage:100V~250V AC,50HZ/60HZ.
  • Lamp unit each:100,000 hours high quality LED.
  • FPM:20 to 60 flashes/per minute pre-set in factory.
  • Color:Red.
  • Output:360° horizontal; 4° vertical.
  • Photo sensor:50Lux
  • Lighting protection level:10KA
  • Housing: casting aluminum&PC lens cover.
  • Finish: UV stablized spraying plastic.
  • Overall size: 47cm×21cm×30.1cm.
  • Mounting size: 17cm×17cm-4×M10.
  • IP rating: IP65.
  • Weight: 7KG.
  • Operating: -40°C to 60 °C.
  • Wind speed: 80m/s.

Order Code:
  • Service+standby, 1 lamp failures,the other 1 lamp replace to work.
  • Service+service, both lamps service,alternate flashing.
  • 00: Standard single light, 3 core cables pre-wired, independently flash, can not synchronized flash with other lights.
  • SC: Signal cable controlled, 4 core cables pre-wired, multiple lights synchronized flashing without control panel.
  • CP: Separate order the CP “control panel”, for a purpose of light failure monitor and control function.





评论

发表评论

此博客中的热门博文

Aircraft warning sphere warning marker balls for power lines

-
图片
Aviation obstruction marking sphere is designed to provide daytime visual warning or nighttime visual warning if comes with reflective tape, for electricity transmission line and overhead wire for aircraft pilots, especially cross river high voltage transmission lines. CDT power line marker ball is made of high-grade Fiberglass Reinforced Plastics(FRP), diameter of 600mm and 800mm are available to meet different customers’ needs.  A marking sphere should be of one color such as aviation orange, white and red. Generally, the marking spheres are placed on the highest line. Where there is more than one line at the highest level, white and red, or white and orange spheres should be displayed alternately. This alternating color scheme provides the most conspicuity against all back ground. PARAMETER Name Aerial Marking Sphere   Model CM-ZAQ Operation Visible Distance 1200 meters Flashing frequency 35KV-1000KV Conductor diameter 15-60
阅读全文

Building Light-Building Obstruction Light/Rooftop Heliport Lighting

-
图片
Buildings lighting Obstruction lighting solutions to be set at the top of buildings, and heliport lights, to be set around the runway in order to guide helicopters pilots. Lighting of buildings with heliports If the building has an elevated heliport, that is to say located on a raised structure on land, lighting marks have to be set around the runways to guide the pilots during take-off and landing. In the case of these elevated heliports, the Final Approach and Take-Off areas (FATO), and the Touchdown and Lift-Off areas (TLOF) are coincidental: only the TLOF runway matters. As a matter of facts, TLOF area should be lighted with TLOF perimeter lights: fixed omnidirectional green lights, inside the floor, or not higher than 25cm, uniformly spaced from 3 meters maximum. It will be possible to add floodlights to the perimeter lights, in order to identify better the heliport marks.  Lighting of buildings judged as air obstacles In t
阅读全文

L-806 L-807 LED Lighted Wind Cone with Obstruction Light/Illuminated Wind Sock

-
图片
A windcone is a carefully designed fabric cone that is mounted on a metal frame. This metal frame is attached to a vertical pole via a swivel that allows the fabric cone to rotate freely. The fabric cone must be designed to provide relative wind speed indication. A fully extended windsock indicates a wind speed in excess of 15 knots. An illuminated windcone must be powered in some manner. Common methods are with 120VAC/240VAC or 6.6Amp circuitry. Recent advances in both LED and solar power technology have allowed for the creation of reliable and compliant solar powered LED windsocks. Wind Direction Indicators or wind cones provide visual surface wind direction and velocity information to pilots in flight or on the ground at airport and heliports. We based our wind cone portfolio on FAA specifications OPTIONS  1. Fabric Windsock: Size 1- 1.2m length, 300mm in throat diameter and 150mm in trailing end diameter; Size 2- 2.4m length, 600mm in throat diameter and 300mm in trailing end diame
阅读全文