Solar Obstruction Lights & Lighting System, Low Intensity Aviation Warning Light 6VDC Steady-Burning Red LED 32.5cd Solar Powered Aviation Obstruction Light for Tower Building

-

 
Solar Obstruction Lights & Lighting System, Low Intensity Aviation Warning Light 6VDC Steady-Burning Red LED 32.5cd Solar Powered Aviation Obstruction Light for Tower Building

Low Intensity Solar Warning Lights (LIOL) with solar panel, multi LED type. In compliance with ICAO Annex 14 Type A, Type B and FAA L-810. As specified by Annex 14 of ICAO regulations, Low Intensity Obstruction Light can be used to warn the presence of obstacles up to 45m height, such as telecommunication towers, wind turbines, chimneys, cranes, buildings and other structures.This beacon is the simplest device according to ICAO standards. It provides steady burning red light with two types of intensity: ≥10cd for Type A, ≥32cd for Type B and≥32cd for Type E (flashing red light). In particular, the Low Intensity Lights with solar panelare used for night-time signalisation where the power supply does not arrive or where it is very weak.



KEY FEATURES -  Solar Obstruction Lights & Lighting System

  • Based on LED technology
  • Patented beacon
  • RED light - Steady Burning 
  • RED light - Flashing 
  • Intensity available: >10 cd (Low intensity type-A); >32 cd (low intensity type B, type E)
  • Long life time >10 years life expectancy 
  • Low consumption
  • Compact assembly
  • Degree of Protection: IP65
  • No RF-radiations
  • Easy to install
  • Reserve - 6-8 days under rainy/cloudy
  • Fully ICAO and FAA compliant
PARAMETER - Solar Obstruction Lights & Lighting System

Item
Parameter
Product Name
Solar Obstruction Lights & Lighting System
Type 
Low Intensity Type B, L-810
Operating Voltage
DC6V
Power consumption
≤5W
Flashing frequency
Steady-On, Flashing
Light intensity
≥32.5cd
Life span
＞100,000 hours
Emitting color
RED
Beam angle
360° horizontal,more than 10° vertical
Overall size(mm)
195mm×195mm×376mm
Installation size(mm)
Ф118mm-4×M10
Ingress protection
IP65
Lightning protection level
10KA
Optical Sensitivity
100Lux
Operating temperature
-40℃～55℃
Net weight
8KG
Wind load
80m/sec.
Solar Panel
9V, 26W-Monocrystalline Solar Panel, 6V, 20AH-Colloidal Battery

TEST VIDEO - Solar Obstruction Lights & Lighting System



CONTACT INFO

Ms Sophia Guo | Overseas Business Development

Hunan Chendong Technology Co.，Ltd

T:+86-0731-85563165 85563265  | F: +86-0731-85563365 

P: +86-13929493960(Whatsapp)  | Skype:sophia.guo88

A:#4 Building, No.588 XinCheng Science&Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha,China.

W:http://www.cdt-en.com/ | E: sophia@chendongtech.com


评论

发表评论

此博客中的热门博文

Night Marking Red Obstruction Light System for Transmission Tower

-
图片
An overhead power line is a structure used in electric power transmission and distribution to transmit electrical energy along large distances. It consists of one or more conductors (commonly multiples of three) suspended by towers or poles. Red obstruction lights are used to increase conspicuity during nighttime. The red obstruction light system is composed of flashing omnidirectional lights (L-864) and/or steady-burning or flashing (L-810) lights. When one or more levels are comprised of flashing lights, the lights should flash simultaneously 1. Single Obstruction Light. A single red obstruction light (L-810) may be used when more than one obstruction light is required either vertically or horizontally, or when maintenance is needed, and can be installed within a reasonable time. Top Level. A single steady-burning light (L-810) may be used to identify low structures, such as airport instrument landing system buildings, as well as long horizontal structures, such as perimeter fenc...
阅读全文

Aircraft warning sphere warning marker balls for power lines

-
图片
Aviation obstruction marking sphere is designed to provide daytime visual warning or nighttime visual warning if comes with reflective tape, for electricity transmission line and overhead wire for aircraft pilots, especially cross river high voltage transmission lines. CDT power line marker ball is made of high-grade Fiberglass Reinforced Plastics(FRP), diameter of 600mm and 800mm are available to meet different customers’ needs.  A marking sphere should be of one color such as aviation orange, white and red. Generally, the marking spheres are placed on the highest line. Where there is more than one line at the highest level, white and red, or white and orange spheres should be displayed alternately. This alternating color scheme provides the most conspicuity against all back ground. PARAMETER Name Aerial Marking Sphere   Model CM-ZAQ Operation Visible Distance 1200 meters Flashing frequency 35KV-1000KV Conductor diameter...
阅读全文

What Are Those Balls That Hang on Power Lines?

-
图片
  When you are flying, the conductors and skyline become almost invisible against the terrain—especially the skyline  wires . The colored plastic balls hanging on overhead electricity wires are called aerial marker balls, and they are installed along the length of wires to act as a visual warning so low-flying aircraft don’t run into them. They're called visibility marker balls or marker balls.  You'll often find them near mountain passes, in the deep valley areas, near major freeway crossings and around airports. They weight about 17 pounds each. The marker balls are placed on power lines to make the conductor crossings visible to aircraft. Overhead wire markers are safety instruments applied to the overhead power lines marking transmission lines and ropeways along the flight path during the day. Markers are often installed on overhead lines near airfields, or at river crossings where there is a possibility of float-equipped...
阅读全文