LED Based L-864 Beacon Red Flashing Night Marking Solar Powered Medium Intensity Type B Aircraft Warning Light for 220KV Transmission Tower Project

-

Medium Intensity Solar Warning Lights (MIOL) with solar panel, multi LED type. In compliance with ICAO Annex 14 Type B, Type C and FAA L-864. This flashing red LED beacon obstruction light is the perfect solution for wind turbines, towers (cell/broadcast/other),buildings, and similar obstructions. Meets FAA and ICAO standards. Available with IR option for night vision. Easily retrofits to replace incandescent light.

Medium Intensity Obstruction Lights with Solar Panel have to be used where the obstacle is particularly large and the height of the surrounding soil is more than 45m and where the power supply does not arrive or where it is very weak.

OPTIONS

  • Twin version: two galvanically separated circuits in the same fixture
  •  Infrared version: IR wavelength 850nM
  • GPS sync






PARAMETER

Item
Item
Name
Solar Powered Medium Intensity Type B Obstruction Light
ICAO Type
Medium Intensity Type B
FAA Type
L-864
Operating voltage
DC12V
Power consumption
≤8W
Flashing frequency
20～60times/min
Light source
Red LED
Light intensity
2000cd(±25%)
Lifespan
＞100,000hours
Emitting color
Red

Beam angle
360° horizontal beam angle
≥ 3° vertical beam spread
Method of synchronization
GPS
Overall size(mm)
550mm×530mm×290mm
Installation size(mm)
235mm*235mm-4×M10
Ingress protection
Ip65
Lightning protection level
15KA
Light controlled sensitivity
100Lux
Operating temperature
-40℃～55℃
Net weight
18kg
Wind load
80m/sec
Solar Power Panel Size
550*340*25mm
Solar Power Voltage
16V
Solar Power Consumption
28W
Lifespan of Solar panel
20 years
Lead Acid Battery
24AH
Using Rainy day OR Cloudy Day
18-20 days for working


TEST VIDEO

 


CONTACT INFO
Ms Sophia Guo | Overseas Business Development
Hunan Chendong Technology Co.，Ltd
T:+86-0731-85563165 85563265  | F: +86-0731-85563365 
P: +86-13929493960(Whatsapp)  | Skype:sophia.guo88
A:#4 Building, No.588 XinCheng Science&Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha,China.
W:http://www.cdt-en.com/ | E: sophia@chendongtech.com

评论

发表评论

此博客中的热门博文

Aircraft warning sphere warning marker balls for power lines

-
图片
Aviation obstruction marking sphere is designed to provide daytime visual warning or nighttime visual warning if comes with reflective tape, for electricity transmission line and overhead wire for aircraft pilots, especially cross river high voltage transmission lines. CDT power line marker ball is made of high-grade Fiberglass Reinforced Plastics(FRP), diameter of 600mm and 800mm are available to meet different customers’ needs.  A marking sphere should be of one color such as aviation orange, white and red. Generally, the marking spheres are placed on the highest line. Where there is more than one line at the highest level, white and red, or white and orange spheres should be displayed alternately. This alternating color scheme provides the most conspicuity against all back ground. PARAMETER Name Aerial Marking Sphere   Model CM-ZAQ Operation Visible Distance 1200 meters Flashing frequency 35KV-1000KV Conductor diameter 15-60
阅读全文

Building Light-Building Obstruction Light/Rooftop Heliport Lighting

-
图片
Buildings lighting Obstruction lighting solutions to be set at the top of buildings, and heliport lights, to be set around the runway in order to guide helicopters pilots. Lighting of buildings with heliports If the building has an elevated heliport, that is to say located on a raised structure on land, lighting marks have to be set around the runways to guide the pilots during take-off and landing. In the case of these elevated heliports, the Final Approach and Take-Off areas (FATO), and the Touchdown and Lift-Off areas (TLOF) are coincidental: only the TLOF runway matters. As a matter of facts, TLOF area should be lighted with TLOF perimeter lights: fixed omnidirectional green lights, inside the floor, or not higher than 25cm, uniformly spaced from 3 meters maximum. It will be possible to add floodlights to the perimeter lights, in order to identify better the heliport marks.  Lighting of buildings judged as air obstacles In t
阅读全文

L-806 L-807 LED Lighted Wind Cone with Obstruction Light/Illuminated Wind Sock

-
图片
A windcone is a carefully designed fabric cone that is mounted on a metal frame. This metal frame is attached to a vertical pole via a swivel that allows the fabric cone to rotate freely. The fabric cone must be designed to provide relative wind speed indication. A fully extended windsock indicates a wind speed in excess of 15 knots. An illuminated windcone must be powered in some manner. Common methods are with 120VAC/240VAC or 6.6Amp circuitry. Recent advances in both LED and solar power technology have allowed for the creation of reliable and compliant solar powered LED windsocks. Wind Direction Indicators or wind cones provide visual surface wind direction and velocity information to pilots in flight or on the ground at airport and heliports. We based our wind cone portfolio on FAA specifications OPTIONS  1. Fabric Windsock: Size 1- 1.2m length, 300mm in throat diameter and 150mm in trailing end diameter; Size 2- 2.4m length, 600mm in throat diameter and 300mm in trailing end diame
阅读全文