L-864 MEDIUM INTENSITY OBSTACLE LIGHT WITH SOLAR PANEL FOR TRANSMISSION TOWER

-
Medium Intensity Solar Warning Lights (MIOL) with solar panel, multi LED type. In compliance with ICAO Annex 14 Type B, Type C and FAA L-864. This flashing red LED beacon obstruction light is the perfect solution for wind turbines, towers (cell/broadcast/other),buildings, and similar obstructions. Meets FAA and ICAO standards. Available with IR option for night vision. Easily retrofits to replace incandescent light.

Medium Intensity Obstruction Lights with Solar Panel have to be used where the obstacle is particularly large and the height of the surrounding soil is more than 45m and where the power supply does not arrive or where it is very weak.




KEY FEATURES
  • Based on LED technology
  • RED light - Flashing (MIOL-B)
  • RED light - Steady Burning (MIOL-C)
  • Intensity available: >2.000 cd
  • Long life time >10 years life expectancy
  • Low consumption
  • Compact assembly
  • Degree of Protection: IP65
  • No RF-radiations
  • Easy to install
  • ICAO Certified




PARAMETER

Item Parameter
Name Aviation Obstacle Light
Model CM-13-T
Operating Voltage DC12V
Power consumption ≤10W
Flashing frequency 20-60 times/min
Light intensity 2000cd
Life span ＞100,000 hours
Emitting color Red
Beam angle 360° horizontal,>3° vertical 
Overall size 255mmx255mmx515mm
Installation size Φ105-4*M10
Ingress protection IP65
Lightning protection level 10KA
Light controlled sensitivity 100Lux
Operating temperature -40℃～55℃
Net weight 17KG
Wind load 80m/sec.
Solar Panel Size 320*230*3mm
Solar Power Voltage 18V
Solar Power Consumption 10.5W per pcs
Lead Acid Battery 24AH
Using Rainy / Cloudy Day 25 days

INSTALLATION

TEST VIDEO

CONTACT INFORMATION
Ms Sophia Guo | Overseas Business Development Hunan Chendong Technology Co.，Ltd T:+86-0731-85563165 85563265 | F: +86-0731-85563365 P: +86-13929493960(Whatsapp) | Skype:sophia.guo88 A:No.101,#4 Building, XinCheng Science and Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha city, Hunan province, China. W:http://www.cdt-en.com/ | E: sophia@chendongtech.com

评论

发表评论

此博客中的热门博文

Aircraft warning sphere warning marker balls for power lines

-
图片
Aviation obstruction marking sphere is designed to provide daytime visual warning or nighttime visual warning if comes with reflective tape, for electricity transmission line and overhead wire for aircraft pilots, especially cross river high voltage transmission lines. CDT power line marker ball is made of high-grade Fiberglass Reinforced Plastics(FRP), diameter of 600mm and 800mm are available to meet different customers’ needs.  A marking sphere should be of one color such as aviation orange, white and red. Generally, the marking spheres are placed on the highest line. Where there is more than one line at the highest level, white and red, or white and orange spheres should be displayed alternately. This alternating color scheme provides the most conspicuity against all back ground. PARAMETER Name Aerial Marking Sphere   Model CM-ZAQ Operation Visible Distance 1200 meters Flashing frequency 35KV-1000KV Conductor diameter 15-60
阅读全文

Building Light-Building Obstruction Light/Rooftop Heliport Lighting

-
图片
Buildings lighting Obstruction lighting solutions to be set at the top of buildings, and heliport lights, to be set around the runway in order to guide helicopters pilots. Lighting of buildings with heliports If the building has an elevated heliport, that is to say located on a raised structure on land, lighting marks have to be set around the runways to guide the pilots during take-off and landing. In the case of these elevated heliports, the Final Approach and Take-Off areas (FATO), and the Touchdown and Lift-Off areas (TLOF) are coincidental: only the TLOF runway matters. As a matter of facts, TLOF area should be lighted with TLOF perimeter lights: fixed omnidirectional green lights, inside the floor, or not higher than 25cm, uniformly spaced from 3 meters maximum. It will be possible to add floodlights to the perimeter lights, in order to identify better the heliport marks.  Lighting of buildings judged as air obstacles In t
阅读全文

L-806 L-807 LED Lighted Wind Cone with Obstruction Light/Illuminated Wind Sock

-
图片
A windcone is a carefully designed fabric cone that is mounted on a metal frame. This metal frame is attached to a vertical pole via a swivel that allows the fabric cone to rotate freely. The fabric cone must be designed to provide relative wind speed indication. A fully extended windsock indicates a wind speed in excess of 15 knots. An illuminated windcone must be powered in some manner. Common methods are with 120VAC/240VAC or 6.6Amp circuitry. Recent advances in both LED and solar power technology have allowed for the creation of reliable and compliant solar powered LED windsocks. Wind Direction Indicators or wind cones provide visual surface wind direction and velocity information to pilots in flight or on the ground at airport and heliports. We based our wind cone portfolio on FAA specifications OPTIONS  1. Fabric Windsock: Size 1- 1.2m length, 300mm in throat diameter and 150mm in trailing end diameter; Size 2- 2.4m length, 600mm in throat diameter and 300mm in trailing end diame
阅读全文