L856 L857- High Intensity Obstruction Light



High Intensity Obstruction Light (HIOL), multi-LED type (90°), compliant to ICAO Annex 14 Type B and FAA L-857.

This product is the ideal solution when looking for compact obstacle light, realized with high quality products and with patented features.

CDT High Intensity Obstruction Light has been designed to be a compact product; it can be easily installed on an horizontal surface thanks to its base or vertical surface thanks to its mounting bracket and a balance of patented lenses, electronics and mechanical components make this device the most reliable and high-quality LED Aircraft Warning Light available on the market.

KEY FEATURES

  • Based on LED technology
  • WHITE light - flashing 
  • High Intensity Type A: 200.000cd day-mode; flashing 20.000cd twilight-mode; flashing 2.000cd night-mode
  • High Intensity Type B: 100.000cd day-mode; flashing 20.000cd twilight-mode; flashing 2.000cd night-mode
  • Long life time >10 years life expectancy
  • Compact
  • Degree of Protection: IP65
  • No RF-radiations
  • Easy to install
  • Wind resistance tested at 240km/h (150mph)
  • Vibration resistance up to: 80m/s2 
  • ICAO, CAAC(Civil Aviation Administration of China) Certified

APPLICATION
Rules concerning aircraft beaconing are established by the ICAO (Annex 14, Chapter 6). Our High Intensity Lights are all certified and homologated by the Civil Aviation (ICAO) and can be installed on every obstacle superior to 150M of height (Pylons, Civil Engineering Structures, Buildings, Cranes, and Chimneys). It is also recommended to add an intermediary level every 105 meters.

  • Airport Buildings – ATC tower – Substations
  • Apron Floodlights Masts
  • Radar – Antenna - Communication Masts
  • Weather Masts
  • High Building – Chimney – Tower Crane
  • Pipe Line – Bridge – Radio and Television Tower
  • Transmission Line – Wind Turbine – Wind Mast Measurement

OPTIONS-Solar Powered High Intensity Obstruction Light
INSTALLATION
 

 

TEST & INSTALLATION VIDEO


CONTACT INFORMATION
Ms Sophia Guo | Overseas Business Development
Hunan Chendong Technology Co.,Ltd
T:+86-0731-85563165 85563265  | F: +86-0731-85563365 
P: +86-13929493960(Whatsapp)  | Skype:sophia.guo88
A:No.101,#4 Building, XinCheng Science and Technology Park, West of Yuelu Ave., Hi-Tech Development Zone,Changsha city, Hunan province, China.
W:http://www.cdt-en.com/ | E: sophia@chendongtech.com

评论

此博客中的热门博文

Night Marking Red Obstruction Light System for Transmission Tower

High-voltage lines are major hazards for low-flying aircraft. Placing beacons on pylons is not sufficient to ensure safety due to the very long spans of cable. - Day Marking The warning ball for high voltage lines is a visual anti-aircraft protection for overhead wires and OPGW wires in high voltage transmission lines. It is recommended that in the case of a sphere with a diameter of 60 cm, the high-voltage line should be marked every 30 meters at the most. - Night Marking Conductor marking lights serve as a specialized category of aircraft warning lights specifically crafted for overhead power lines. In contrast to overhead wire markers that rely on daylight, conductor marking lights are designed to be visible during nighttime. These lights enhance the visibility of transmission line catenary wires in the vicinity of airports, heliports, and locations spanning across rivers. It is built around induction and takes its power from the current of the line, by the intermediary of a multi-winding coil directly installed within the beacon. This allows our system to adapt to every line voltage.

Overhead Wire Marker Fiberglass Aircraft Warning Sphere Day Marking Aerial Marker Balls for High Voltage Power Lines