CDT-Aviation Obstruction Light

Medium Intensity Obstruction Light (MIOL), multi-LED type, compliant to ICAO Annex 14 Type B, Type C, FAA L-864 and ICAO Certified. This product is the ideal solution when looking for compact and lightweight obstacle light, realized with high quality products and with patented features. CDT Medium Intensity Obstruction Light has been designed to be a compact and lightweight product; it can be easily installed on an horizontal surface thanks to its base or vertical surface thanks to its mounting bracket and a balance of patented lenses, electronics and mechanical components make this device the most reliable and high-quality LED Aircraft Warning Light available on the market.  KEY FEATURES Based on LED technology RED light - Flashing (Medium Intensity Type B) RED light - Steady Burning (Medium Intensity Type C) Intensity available: >2.000 cd  Long life time >10 years life expectancy Low consumption Lightweight and compact Degree of Protection: IP65 ...

Telecommunications & Radio Towers are, typically,tall structures designed to support antennas for telecommunications and broadcasting, including television. They are among the tallest man-made structures. Basic Rule The number of light levels recommended depends on the height of the structure The number and arrangement of light units at each level should be placed so the lighting is visible from every angle in azimuth Lights are applied to display the general definition of the structure Width and length of buildings determine the number of lights installed at the top and at each light level Obstruction Light Installation h ≤ 45m            Only one level: Low intensity 45m < h ≤ 105m     2 levels  *Top level: Medium intensity;   *Intermediate level: Low intensity/Medium Intensity; 105m < h ≤ 210m    4 levels *Top level: Medium intensity; *First Intermediate leve...

Buildings lighting Obstruction lighting solutions to be set at the top of buildings, and heliport lights, to be set around the runway in order to guide helicopters pilots. Lighting of buildings with heliports If the building has an elevated heliport, that is to say located on a raised structure on land, lighting marks have to be set around the runways to guide the pilots during take-off and landing. In the case of these elevated heliports, the Final Approach and Take-Off areas (FATO), and the Touchdown and Lift-Off areas (TLOF) are coincidental: only the TLOF runway matters. As a matter of facts, TLOF area should be lighted with TLOF perimeter lights: fixed omnidirectional green lights, inside the floor, or not higher than 25cm, uniformly spaced from 3 meters maximum. It will be possible to add floodlights to the perimeter lights, in order to identify better the heliport marks.  Lighting of buildings judged as air obstacles...

Application: Solar Powered Obstruction Lighting for Telecom Towers Products: CK-11L-TZ solar low intensity type a LED obstruction light Location:  Zimbabwe   INTRODUCTION Low Intensity Solar Obstruction Light (LIOL),  multi-LED type , compliant to ICAO Annex 14 Type A, Type B, Type E and FAA L-810. This product is the ideal solution when looking for a reliable and high-quality solar system, to be installed in areas without power supply or when a temporary obstacle light system is required. CDT CK-11L-TZ Low Intensity Obstruction Light with Solar Panel has been designed to be an assembly as  compact  as possible and  easy to install . KEY FEATURES Based on LED technology Patented beacon RED light - Steady Burning (ICAO - FAA) RED light - Flashing (FAA) Intensity available:  >10 cd  (LIOL-A); >32 cd (LIOL-B and LIOL-E) Long life time >10 years life expectancy (for beacon) Low consumptio...

             Item Name  Low Intensity Type A Aviation Obstruction Light     Model CK-11L     Operating Voltage AC90-260V     Power consumption ≤5W     Flashing frequency Steady-Burning     Light intensity 10cd     Life span ＞100,000 hours     Emitting color RED     Beam angle 360° horizontal,> 3° vertical     Overall size ∅150mm×230mm     Installation size Φ125-4*M10   Ingress protection IP65     Operating temperature -40℃～55℃     Net weight 1.5KG     Wind load 80m/sec.     Specification Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fits the harsh environment very well. House of the light is made of aluminum alloy and steel, painted by spraying plastic, the structure is high strength ,resistance to corrosion. ...