博文

目前显示的是 九月, 2024的博文

Installation of obstruction lights powered with solar kit on towers supporting high voltage cables, ICAO compliant high/medium intensity, white flashing daylight, twilight and night, with incorporated photocell, fault monitoring, GPS synchronization and ethernet connection on request.

-
图片
  Installation of obstruction lights powered with solar kit on towers supporting high voltage cables, ICAO compliant high/medium intensity, white flashing daylight, twilight and night, with incorporated photocell, fault monitoring, GPS synchronization and ethernet connection on request. For more details: Website: http://www.cdt-en.com/ Email: sophia@chendongtech.com Phone/WhatsApp:+86-13929493960
发表评论
阅读全文

High-voltage lines are major hazards for low-flying aircraft. Placing beacons on pylons is not sufficient to ensure safety due to the very long spans of cable. - Day Marking The warning ball for high voltage lines is a visual anti-aircraft protection for overhead wires and OPGW wires in high voltage transmission lines. It is recommended that in the case of a sphere with a diameter of 60 cm, the high-voltage line should be marked every 30 meters at the most. - Night Marking Conductor marking lights serve as a specialized category of aircraft warning lights specifically crafted for overhead power lines. In contrast to overhead wire markers that rely on daylight, conductor marking lights are designed to be visible during nighttime. These lights enhance the visibility of transmission line catenary wires in the vicinity of airports, heliports, and locations spanning across rivers. It is built around induction and takes its power from the current of the line, by the intermediary of a multi-winding coil directly installed within the beacon. This allows our system to adapt to every line voltage.

-
图片
High-voltage lines are major hazards for low-flying aircraft. Placing beacons on pylons is not sufficient to ensure safety due to the very long spans of cable. - Day Marking The warning ball for high voltage lines is a visual anti-aircraft protection for overhead wires and OPGW wires in high voltage transmission lines. It is recommended that in the case of a sphere with a diameter of 60 cm, the high-voltage line should be marked every 30 meters at the most. - Night Marking Conductor marking lights serve as a specialized category of aircraft warning lights specifically crafted for overhead power lines. In contrast to overhead wire markers that rely on daylight, conductor marking lights are designed to be visible during nighttime. These lights enhance the visibility of transmission line catenary wires in the vicinity of airports, heliports, and locations spanning across rivers. It is built around induction and takes its power from the current of the line, by the intermediary of a multi-w
发表评论
阅读全文

The high voltage electric power transmission towers which are located in the vicinity of airports represent a serious danger to air navigation and several incidents have occurred in the world of airplanes or helicopters crashed on the towers or cables of high voltage lines. Medium-intensity white obstacle lights for day and night marking of the towers of the various high-voltage lines, compliant to ICAO Annex 14 Type A.

-
图片
  The high voltage electric power transmission towers which are located in the vicinity of airports represent a serious danger to air navigation and several incidents have occurred in the world of airplanes or helicopters crashed on the towers or cables of high voltage lines. Medium-intensity white obstacle lights for day and night marking of the towers of the various high-voltage lines, compliant to ICAO Annex 14 Type A. For more details: Website: http://www.cdt-en.com/ Email: sophia@chendongtech.com Phone/WhatsApp:+86-13929493960
发表评论
阅读全文

An omnidirectional, steady-burning or flashing, elevated LED light fixture (red) with an infrared option for marking all fixed obstructions to eliminate air navigational hazards. Available as a single or dual unit in 120-240 VAC and 24-48 VDC.

-
图片
  An omnidirectional, steady-burning or flashing, elevated LED light fixture (red) with an infrared option for marking all fixed obstructions to eliminate air navigational hazards. Available as a single or dual unit in 120-240 VAC and 24-48 VDC. For more details: Website: http://www.cdt-en.com/ Email: sophia@chendongtech.com Phone/WhatsApp:+86-13929493960
发表评论
阅读全文